Comments for Sharing Knowledge http://tbhermawan.wordpress.com Tb. Hermawan A. Tue, 13 Oct 2009 07:56:13 +0000 http://wordpress.com/ hourly 1 Comment on Burst Error Rate (BER) by Ravinder Bhatnager http://tbhermawan.wordpress.com/2007/06/10/burst-error-rate-ber/#comment-21 Ravinder Bhatnager Tue, 13 Oct 2009 07:56:13 +0000 http://tbhermawan.wordpress.com/2007/06/10/burst-error-rate-ber/#comment-21 In this case, you can check RF pigtail cable of BSU connected from ODU to antenna. In case either it is loose,faulty or having rusted elements on its connector, you might face the issue of burst error because in this case there would be delay in your proper transmission. In this case, you can check RF pigtail cable of BSU connected from ODU to antenna. In case either it is loose,faulty or having rusted elements on its connector, you might face the issue of burst error because in this case there would be delay in your proper transmission.

]]> Comment on Burst Error Rate (BER) by RF Engineering http://tbhermawan.wordpress.com/2007/06/10/burst-error-rate-ber/#comment-16 RF Engineering Tue, 02 Sep 2008 03:43:36 +0000 http://tbhermawan.wordpress.com/2007/06/10/burst-error-rate-ber/#comment-16 Dear Santanu, Normally, if there is an interference that impact to your BSU sector, you can check @ the BSU RF Signal Quality. Click the reset signal quality counters button. After resetting the counter, check the 'No Unique Word Count' value. If the value is higher than '80', it mean that there is an signal interference. Have you increase the port receive power of the BSU step by step until reach -60 dBm? If that way doesn't solve the problem, maybe you need to change your WSS frequency. Regards, TB Dear Santanu,

Normally, if there is an interference that impact to your BSU sector, you can check @ the BSU RF Signal Quality. Click the reset signal quality counters button. After resetting the counter, check the ‘No Unique Word Count’ value. If the value is higher than ‘80′, it mean that there is an signal interference.
Have you increase the port receive power of the BSU step by step until reach -60 dBm?
If that way doesn’t solve the problem, maybe you need to change your WSS frequency.

Regards,
TB

]]> Comment on Burst Error Rate (BER) by santanu http://tbhermawan.wordpress.com/2007/06/10/burst-error-rate-ber/#comment-15 santanu Mon, 01 Sep 2008 19:37:37 +0000 http://tbhermawan.wordpress.com/2007/06/10/burst-error-rate-ber/#comment-15 can u please give me more solutions for decresing Burst Error Rate. because we found one of our BSU had more than 25% BER & we unable resolve the problem. please help us for resolve the issue. thanks & regards, santanu can u please give me more solutions for decresing Burst Error Rate. because we found one of our BSU had more than 25% BER & we unable resolve the problem. please help us for resolve the issue.

thanks & regards,

santanu

]]> Comment on About Me by daniel http://tbhermawan.wordpress.com/about/#comment-8 daniel Mon, 22 Oct 2007 08:27:56 +0000 #comment-8 I think.. in RF and Networking.. U are...The MAN... success for u.. I think.. in RF and Networking..
U are…The MAN… success for u..

]]> Comment on About Me by keibo http://tbhermawan.wordpress.com/about/#comment-5 keibo Wed, 29 Aug 2007 12:32:14 +0000 #comment-5 wekekekekekekek mas gitu deh..... wekekekekekekek mas gitu deh…..

]]> Comment on About Me by theo http://tbhermawan.wordpress.com/about/#comment-3 theo Wed, 15 Aug 2007 13:50:00 +0000 #comment-3 silent man, misterious man, wuenak diajak ngobrol.. nah bingung kan.. abis pikirin frequency-balmon-interfernce-..... :D sukses slalu yoo.. peace silent man,
misterious man,
wuenak diajak ngobrol.. nah bingung kan..

abis pikirin frequency-balmon-interfernce-….. :D

sukses slalu yoo.. peace

]]>